Showing 1–16 of 28 results
-
Select options10mm Rebar Setting Out Pins
£0.95 – £2.10CARES Approved to BS4449:2005 high tensile reinforcing bar pins. Ideal for marking key positions and setting out on site. Various lengths available.
-
Select options
10mm Reinforcing Bar BS4449:2005
£4.00 – £12.00CARES Approved to BS4449:2005 high tensile reinforcing bar. 10mm diameter Specification: Grade B500B or C
-
Add to basket2m Plastic Sleeves
£1.25Rigid plastic sleeve, designed to allow spacing between formwork and the safe removal of tie bar for re-use. Sleeve can be cut to suit on site. For use specifically with 15mm tie bar. Per 2m length
-
Add to basketAdobreak Debonding Compound
£58.58Adobreak debonding compound is a bituminous compound used to prevent dowel bars from bonding to concrete. Can be applied by brush or dip coated onto dowel bars. Coverage 2 – 4sqm per litre. Available in 5L tins.
-
Select optionsBarrier Fencing Mesh
£26.00Barrier Fencing Mesh is used for cordoning off areas both indoors and outdoors. Offers high visibility.
-
Select optionsBlack Annealed Tying Wire
£15.00 – £31.87Black soft annealed tying wire available in 17 gauge (1.4mm) wire. Designed to easily tie reinforcing bar and fabric on site. Also used to tie concrete and wire spacers. Available in the following sizes:
Gauge (mm) Weight (kg) 17 (1.4) 2 17 (1.4) 8 -
Select optionsConical Waxed Cardboard Bolt Boxes
£0.98 – £3.50Made from toughened waxed cardboard, specifically designed for use with holding down bolts. The waxed cone can be cut away when no longer required. Available in the following sizes:
Tapering from (mm) Length (mm) 70 x 20 229 92 x 20 305 108 x 25 380 114 x 30 457 165 x 35 762 -
Select optionsDouble Loop Ties
£21.50 – £27.52Black annealed double loop ties available as an alternative to standard tying wire. Specifically designed for use with tying tool, simply wrap the tie around the reinforcing bar and pull with the tying tool. Available in the following sizes:
Gauge (mm) Length (mm) 16 (1.6) 150 16 (1.6) 200 -
Select optionsDowel Bar Debonding Sleeves
£0.50 – £0.85Tough, durable and flexible PVC sleeve which acts as a method of debonding dowel bars preventing them from bonding to the concrete. Sleeves can be cut to suit. Available in the following sizes:
Size (mm) Pack Size 12 x 450 100 16 x 450 100 20 x 300 100 25 x 300 100 32 x 375 92 -
Read moreDyna Quell Waterstop Bar
£26.00Dyna Quell Water Stop is a sodium bentonite based waterstop designed to stop water infiltration through cast-in-place concrete construction joints. It expands on contact with water to form positive seal against the concrete. 5m Roll.
-
Read moreExpanded Metal Sheets
£14.50A galvanised expanded metal sheet used as a permanent shuttering for stopends. 445mm x 2m Sheet
-
Select optionsFlat Base Spacers
£22.00 – £39.00Clip on flat base (grade plate) plastic spacers, comprising two variants of reinforcing cover. The large base area is ideal for use with a damp proof membrane as it prevents puncturing. Suitable for both horizontal and vertical applications.
-
Select optionsFormwork Foam
£10.00 – £14.00Formwork Foam is a closed cell polyethylene foam to stop grout loss at formwork joints. It is available in a low or high density option.
-
Add to basketFormwork Tape
£7.50Formwork tape is a PVC tape used to seal joints in formwork to prevent grout loss. 50mm Wide x 27m Long
-
Select optionsGrade 304 Stainless Steel Tying Wire
£15.80 – £143.75Grade 304 annealed stainless steel tying wire available in 18 gauge (1.2mm) wire. Specifically designed for use with stainless steel reinforcement or in situations where there could be a risk of staining. Available in the following sizes:
Gauge (mm) Weight (kg) 18 (1.2) 1 18 (1.2) 20 -
Add to basketHexagon Connector
£3.90Hexagonal connector 305 x 105mm designed to connect two tie bars together. The centre stop ensures equal spacing of bar inside the connector. For use specifically with 15mm tie bar.