Showing all 13 results
-
Add to basket2m Plastic Sleeves
£1.25Rigid plastic sleeve, designed to allow spacing between formwork and the safe removal of tie bar for re-use. Sleeve can be cut to suit on site. For use specifically with 15mm tie bar. Per 2m length
-
Read moreExpanded Metal Sheets
£14.50A galvanised expanded metal sheet used as a permanent shuttering for stopends. 445mm x 2m Sheet
-
Select options This product has multiple variants. The options may be chosen on the product pageFormwork Foam
£15.00 – £17.00Formwork Foam is a closed cell polyethylene foam to stop grout loss at formwork joints. It is available in a low or high density option.
-
Add to basketFormwork Tape
£9.50Formwork tape is a PVC tape used to seal joints in formwork to prevent grout loss. 50mm Wide x 27m Long
-
Add to basketHexagon Connector
£3.90Hexagonal connector 305 x 105mm designed to connect two tie bars together. The centre stop ensures equal spacing of bar inside the connector. For use specifically with 15mm tie bar.
-
Add to basketPlastic Cones
£0.20Plastic cone designed to fit onto each end of the plastic sleeve for easy removal leaving a 10mm tapered finish to concrete ready for filling with tie plug cement.
-
Add to basketPressed Waler Plate
£3.25High quality pressed wailer plate 120mm x 120mm x 10mm. For use specifically with 15mm wing nuts to help spread the tie load into the steel or timber soldiers.
-
Read moreRock Anchors
£5.50Expandable anchor for securing tie bar in rock or concrete. Drill hole and insert the anchor which will expand when the tie bar is threaded in. Load test should be conducted before use.
-
Add to basketRubber Stoppers
£0.14Rubber plug designed to fit inside plastic sleeve prior to filling with tie plug cement.
-
Select options This product has multiple variants. The options may be chosen on the product pageTie Bar
£2.60 – £8.77High tensile threaded steel bar with a safe working load of 90kn. Supplied from stock in 6m lengths. Cut to length service provided upon order where shorter lengths are required.
-
Add to basketTie Plug Cement
£37.00A polymer, modified, fibre reinforced, cementitious powder designed specifically for plugging tie holes. When mixed with water it forms a cohesive easy-to-apply shrinkage compensating compound and cures to develop a strongly bonded watertight plug to form an effective seal. Rubber stoppers are available. Available in 8kg Tubs.
-
Read moreWeldable Anchors
£5.60A forged anchor which can be welded to structural steel, sheet piling etc. Anchors must be welded continuously all the way round. Load test should be conducted before use. Price is per unit
-
Add to basketWing Nuts
£3.47Winged steel nut designed to secure waler plates against formwork. For use specifically with 15mm tie bar.