Rigid plastic sleeve, designed to allow spacing between formwork and the safe removal of tie bar for re-use. Sleeve can be cut to suit on site. For use specifically with 15mm tie bar.
Per 2m length
Hexagonal connector 305 x 105mm designed to connect two tie bars together. The centre stop ensures equal spacing of bar inside the connector. For use specifically with 15mm tie bar.
Plastic cone designed to fit onto each end of the plastic sleeve for easy removal leaving a 10mm tapered finish to concrete ready for filling with tie plug cement.
High quality pressed wailer plate 120mm x 120mm x 10mm. For use specifically with 15mm wing nuts to help spread the tie load into the steel or timber soldiers.
Expandable anchor for securing tie bar in rock or concrete. Drill hole and insert the anchor which will expand when the tie bar is threaded in.
Load test should be conducted before use.
High tensile threaded steel bar with a safe working load of 90kn.
Supplied from stock in 6m lengths.
Cut to length service provided upon order where shorter lengths are required.
A polymer, modified, fibre reinforced, cementitious powder designed specifically for plugging tie holes. When mixed with water it forms a cohesive easy-to-apply shrinkage compensating compound and cures to develop a strongly bonded watertight plug to form an effective seal.
Available in 8kg Tubs.
A forged anchor which can be welded to structural steel, sheet piling etc. Anchors must be welded continuously all the way round.
Load test should be conducted before use.
Price is per unit